新入荷 再入荷

商品名:Digilent PYNQ-Z1 Zynq-7000 Development Board 1個 6003-410-017DescriptionThe PYNQ-Z1 board is designed to be used with the PYNQ open-source framework that enables embedded programmers to program the onboard SoC with Python. It is designed around the Xilinx Zynq-7000 SoC， which combines the programmable logic of an FPGA with a dual-core ARM Cortex-A9 processor.Hardware-wise， the PYNQ-Z1 is flexible and ready-to-use. It is similar in form factor and features to Digilents Arty Z7， featuring popular Arduino headers， Pmod ports， onboard I/O， HDMI in/out， audio out， and USB and Ethernet connectivity. This makes the PYNQ-Z1 a versatile and easily customizable SoC development platform for applications such as computer vision， industrial control， IoT， encryption， and embedded computing acceleration.What really sets the PYNQ-Z1 apart is the PYNQ open-source framework.（See the Software tab for more details on the PYNQ framework.）The board can be booted from a microSD card containing PYNQ-Z1 boot image. The PYNQ-Z1 image can be downloaded for free and copied to a microSD card. See the Support Materials for additional information. You can also purchase a microSD with the image pre-loaded here.For designers who want to extend the base system by contributing new hardware libraries， Xilinx Vivado Design Suite WebPACK edition tools are available free of cost.For PYNQ projects and support， visit www.pynq.io.FeaturesSoC Features：〇ZYNQ XC7Z020-1CLG400C〇650MHz dual-core Cortex-A9 processor〇DDR3 memory controller with 8 DMA channels and 4 high performance AXI3 slave ports〇High-bandwidth peripheral controllers：1G Ethernet， USB 2.0， SDIO〇Low-bandwidth peripheral controller：SPI， UART， CAN， I2C〇Programmable from JTAG， Quad-SPI flash， and microSD card〇Artix-7 family programmable logic13，300 logic slices， each with four 6-input LUTs and 8 flip-flops630 KB of fast blockRAM4 clock management tiles， each with a phase-locked loop（PLL）and mixed-mode clock manager（MMCM）220 DSP slicesOn-chip analog-to-digital converter（XADC）Memory：〇512MB DDR3 with 16-bit bus @ 1050Mbps〇16MB Quad-SPI Flash with factory programmed globally unique identifier（48-bit EUI-48/64 compatible）.〇MicroSD slotPower：〇Powered from USB or any 7V-15V source（see recommended products）USB and Ethernet：〇USB-JTAG Programming circuitry〇USB-UART bridge〇USB OTG PHY（supports host only）〇Gigabit Ethernet PHYAudio and Video：〇Electret microphone with pulse density modulated（PDM）output〇3.5mm mono audio output jack， pulse-width modulated（PWM）format〇HDMI sink port（input）〇HDMI source port（output）Switches， push-buttons， and LEDs：〇4 push-buttons〇2 slide switches〇4 LEDs〇2 RGB LEDsExpansion Connectors：〇Two standard Pmod ports16 Total FPGA I/O〇Arduino/chipKIT Shield connector49 Total FPGA I/O6 Single-ended 0-3.3V Analog inputs to XADC4 Differential 0-1.0V Analog inputs to XADCProduct Compliance：〇HTC：8471500150〇ECCN：5A992.cWhats IncludedPYNQ-Z1 development boardThe board does not include a power supply， USB cable， Ethernet cable， or microSD card as these are tools interchangeable between many other products. If you do not have any of these required accessories， they are available here.